studio technologies Model 5482-02 Dante Bridge

Applications:
Interconnects up to 64 channels in each direction between two independent Dante audio-over-Ethernet networks. Also supports AES67-2018 applications. Integrated sample-rate-conversion (SRC) functions ensure that timing of independent networks is maintained.

Versions Available:
Model 5482-01: supports up to 32 channels (44.1 or 48 kHz sample rates) and 16 channels (88.2 or 96 kHz sample rates)
Model 5482-02: supports up to 64 channels (44.1 or 48 kHz sample rates) and 32 channels (88.2 or 96 kHz sample rates)

Network Audio Technology (each Network Interface):
Type: Dante audio-over-Ethernet
AES67-2018 Support: yes
Dante Domain Manager (DDM) Support: yes
Ethernet Interface Configuration: switched or redundant
Sample Rates: 44.1, 48, 88.2, or 96 kHz
Pull-Up/Down Support: yes
Bit Depth: up to 24 bits
Number of Transmitter (Output) Channels-M5482-01: 32 (44.1 or 48 kHz sample rates), 16 (88.2 or 96 kHz sample rates)
Number of Transmitter (Output) Channels-M5482-02: 64 (44.1 or 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
Number of Receiver (Input) Channels-M5482-01: 32 (44.1 or 48 kHz sample rates), 16 (88.2 or 96 kHz sample rates)
Number of Receiver (Input) Channels-M5482-02: 64 (44.1 or 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
Dante Audio Flows: 32 transmitter, 32 receiver

Network Interfaces: 2
Physical Ethernet Connections per Interface: 3, Dante Primary, Dante Secondary, and Management
Ethernet Connection Type: 1000BASE-T Gigabit Ethernet (GigE) per IEEE 802.3ab (10 and 100 Mb/s not supported)
Ethernet Connection NIC Status LEDs: one link and one activity for each Ethernet connection

Audio Performance:
Type: fully digital paths between network interfaces (by way of sample-rate-converter (SRC) functions)
Dynamic Range: 147 dB at 48 kHz sample rate, 148 at 96 kHz sample rate, A-weighted
Distortion (THD+N): -140 dB at 48 kHz sample rate, -143 dB at 96 kHz sample rate, measured at -1 dBFS, 1 kHz
Internal Digital Audio Processing: 32 bits
Input-to-Output Audio Processing Latency: <500 uSec

Front-Panel LEDs: 12, dual-color
Functions: provides indication of condition of incoming AC and DC power, Dante status on each interface, and Ethernet status on each interface

Back-Panel LEDs: 14
Functions: provides status indication of both firmware update functions and six Ethernet interfaces

Power Sources:
AC Mains: 100 to 240 V, 50/60 Hz, 8 W maximum
DC: 10 to 18 V, 0.6 A max

Connectors:
Ethernet: 6, RJ45 jacks
USB: 2, type A receptacle (used only for updating firmware)
DC Input: 4-pin male XLR (pin 1 negative, pin 4 positive)
AC Mains Input: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)

Environmental:
Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Storage Temperature: -40 to 70 degrees C (-40 to 158 degrees F)
Humidity: 5 to 95%, non-condensing
Altitude: not characterized

Dimensions:
19.0 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
8.0 inches deep (20.3 cm)

Mounting: one space (1U) in a standard 19-inch rack

Weight: 3.2 pounds (1.4 kg)