Login Area

BEATRICE D8 - Glensound

Intercoms > DANTE Intercom
₦ 5,118,747.95
VAT Included
Adcom - Glensound
New
Available in 10 days
Glensound 8 Channel Network Audio Desktop Intercom

The Glensound BEATRICE D8 is a versatile and fully featured 8 channel desktop intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.
It is part of our Beatrice intercom system that utilises the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.
It is also AES67 compliant.
As such the BEATRICE D8 is fully compatible with other manufacturers' equipment using the Dante and/ or AES67 protocols.
This desktop intercom was designed to be very easy to use for the operator and simple to set up for the technician.
It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.
Also Available In AE67/ Ravenna Version.

8 Channels Of Intercom
One single user connected to the unit can listen to and communicate with 8 separate locations on the network.
Depending upon how the Dante network has been routed the incoming audio circuits and outgoing circuits can be different locations.

Dante Routing & Partyline
Audio routing to/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 8 channels).
Therefore we've included an inbuilt fixed ratio 14 input 19 output mixer matrix with inputs and outputs connected directly to the Dante / AES67 network which allows for setting up partyline and complex group circuits.

Onboard Mic & External Mic Input
A good quality, clear sounding microphone amplifier, designed for communication purposes, is fitted which also has the benefit of a compressor/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited.
This microphone amp has two microphone sources, either the inbuilt front panel mounted
Audio
Mic Gain Range: +61 to +21dB
Phantom Power: 12 Volts (set by internal link)
Equivalent Input Noise: -126dB (20Hz to 20kHz A weighted 150 Ohms)
Headphone Impedance: 32 - 1000 Ohms
Max Headphone Output Level: +14dB into 600 Ohms
Headphone Connector: 6.35mm (1/4") TRS socket
Band Pass Filter: 50Hz to 15kHz

Call Circuit
Inband Calling Frequency: 20kHz
Amplitude: -20dBFs
Duration Of Signal: 2 seconds
Compatibility: All Glensound Beatrice units and Studio Technologies

Power
Mains Voltage: 100 to 240 VAC +/-10%
Mains Frequency: 50 to 60Hz
Power Over Ethernet (PoE): 48 Volts
Consumption: 15 Watts
Redundancy: Mains and PoE are dioded together for glitch free redundancy

Environmental
Operating Temperature: 0 to +50°C (32 to 122°F)
Storage Temperature: -20 to +70°C (-4 to 158°F)
Relative Humidity: 0 to 95% non-condensing

General
Mechanics: All aluminium with laser etched anodised panels and light textured black powder coated sides, base and lid
Size: 269x172x100mm
Weight: 1.6Kg (3.5lb)
1x BEATRICE D8
1x Handbook: By download
1x Network Cable: 2 meter RJ45 to RJ45 cable

Accessories for BEATRICE D8

Others customers also ordered
Best selling