BEATRICE P1 - Glensound
Intercoms > DANTE Intercom
₦ 2,246,763.71
VAT Included
VAT Included
Adcom - Glensound
New
Available in 10 days
Glensound Phone handset Dante network intercom
The user of the handset on the P1 can listen to one audio feed from the network and send one audio channel out onto the network.
Depending upon how the Dante network has been routed, the incoming audio circuit and outgoing audio circuit can be different locations and the outgoing circuit can be routed to multiple locations.
Audio to / from the handset is automatically turned on when the handset is off the hook and turned off when on the hook.
The Beatrice P1 unit is fully compatible with other manufacturers' equipment using the Dante protocol.
Mic Amp with compressor and Phantom Power
A good quality, clear sounding microphone amplifier designed for communication purposes is fitted to the output of the handset's microphone capsule, which also has the benefit of a compressor/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited.
The gain of the microphone amplifier can be adjusted in the menu system to suit your working environment.
Handset Loudspeaker Amp With Volume Control
A low noise amplifier is fitted to provide the best possible output to the handset's earpiece.
A volume control is provided to allow the user to easily adjust the volume of the handset's earpiece.
Incoming Level Gain
As well as the volume control adjusting the audio level to the telephone handset's earpiece, it is possible by using the menu system to adjust the gain of the incoming network audio circuit(s).
Single Cable For Power & Audio
One single standard RJ45 network cable provides both power (PoE) and bi-directional multichannel digital audio (Dante®/ AES67 compliant).
Call Function
A simple call function is inbuilt allowing the operator of one unit to call/alert other users that they want to communicate with them.
To call another user the operator double taps the speak key of the channel they want to call (P2) or the dedicated call key (P1).
This then flashes a bri
The user of the handset on the P1 can listen to one audio feed from the network and send one audio channel out onto the network.
Depending upon how the Dante network has been routed, the incoming audio circuit and outgoing audio circuit can be different locations and the outgoing circuit can be routed to multiple locations.
Audio to / from the handset is automatically turned on when the handset is off the hook and turned off when on the hook.
The Beatrice P1 unit is fully compatible with other manufacturers' equipment using the Dante protocol.
Mic Amp with compressor and Phantom Power
A good quality, clear sounding microphone amplifier designed for communication purposes is fitted to the output of the handset's microphone capsule, which also has the benefit of a compressor/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited.
The gain of the microphone amplifier can be adjusted in the menu system to suit your working environment.
Handset Loudspeaker Amp With Volume Control
A low noise amplifier is fitted to provide the best possible output to the handset's earpiece.
A volume control is provided to allow the user to easily adjust the volume of the handset's earpiece.
Incoming Level Gain
As well as the volume control adjusting the audio level to the telephone handset's earpiece, it is possible by using the menu system to adjust the gain of the incoming network audio circuit(s).
Single Cable For Power & Audio
One single standard RJ45 network cable provides both power (PoE) and bi-directional multichannel digital audio (Dante®/ AES67 compliant).
Call Function
A simple call function is inbuilt allowing the operator of one unit to call/alert other users that they want to communicate with them.
To call another user the operator double taps the speak key of the channel they want to call (P2) or the dedicated call key (P1).
This then flashes a bri
