DWR-S03D/HS1EAN  5013493392168

Receiver Type: Slot-in (2 channels)
Transmission Method: WiDIF-HP (x2)
Circuit System: Dual Superheterodyne
Oscillator Type: Quartz-controlled PLL Synthesizer
Reception Type: True Diversity Method
FR Input Terminal: SMA-R, 50 ohms
Antenna Type: Removable
Sensitivity: 20 dBµ or less (at an ambient temperature of 25°C, with a bit error rate of = 1 x 10-5, no reduction in signal-to-noise ratio)
Carrier Frequencies:
- UC7: 470.125 MHz to 607.875 MHz, 614.125 MHz to 615.875 MHz (UHF TV channels 14 to 36, 38)
- L/CE7: 470.025 MHz to 614.000 MHz MHz (UHF TV channels 21 to 38)
- H/CE7: 566.025 MHz to 714.000 MHz (UHF TV channels 33 to 51)
- G/J: 1240.150 MHz to 1251.825 MHz, 1253.175 MHz to 1259.850 MHz
Reference Output Level:
- Analog: -40 dBu
- Digital: -36 dBFS/-20 dBFS (switchable)
Dynamic Range: 106 dB or more (A-weighted)
Distortion (T.H.D.): MODE1, MODE2, MODE4: 0.03% or less MODE3: 0.3% or less
Audio Delay:
- Analog output when combined with the DWA-01D/F01D unit, MODE1: 2.1 msec, MODE2: 1.7 msec, MODE3: 3 msec, MODE4: 1.7 msec
- ABS/EBU output in combination with the DWA-01D/F01D unit, MODE1: 1.9 msec, MODE2: 1.5 msec, MODE3: 2.8 msec, MODE4: 1.5 msec
- Via a digital connection to a camcorder, MODE1: 1.9 msec, MODE2: 1.3 msec, MODE3: 2.7 msec, MODE4: 1.4 msec
Audio Output Connector:
- 15-pin D-sub (male) (x1) with optional DWA-SLAS1 adapter
- 25-pin D-sub (male) (x1) with optional DWA-SLAU1 adapter
Operating Voltage: DC 6 V to 18 V
Power Consumption:
- 3.5 W or less with optional adapter DWA-SLAS1
- 4 W or less with optional DWA-SLAU1 adapter
Operating Temperature: 0 to +50°C
Storage Temperature: -20°C to 60°C
Wireless Remote Control: 2.4 GHz compliant with IEEE 802.15.4
Dimensions:
- Approx. 88 x 119 x 32 mm (W/H/D) (excluding antennas) with optional DWA-SLAS1 adapter
- Approx. 74 x 119 x 31 mm (W/H/D) (excluding antennas) with optional DWA-SLAU1 adapter
Weight:
- Approx. 193 g with optional DWA-SLAS1 adapter (including antennas)
- Approx. 196 g with optional DWA-SLAU1 adapt