CONTROL 25-1L-WH
JBLEAN:691991005121
₦ 1,242,591.43
VAT Included
VAT Included
Adcom - JBL
New
Available in 15 days
General
Frequency Range (-10 dB): 60 Hz to 20 kHz
Frequency Response (+/-3 dB): 85Hz - 17 kHz
Power Rating: 200 W Continuous Program (2 hrs) , 100 W (400W peak), Continuous Pink Noise (2 hrs) , 75 W (300W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage: 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL: 110 dB ave. Continuous Pink Noise (116 dB peak)
Sensitivity: 90 dB, 1W/1m (ave. 100 Hz - 10 kHz)
Coverage Angle: 100° x 100°
Directivity Factor (Q): 6.04 (averaged 1kHz - 16kHz)
Directivity Index (DI): 7.6dB (averaged 1kHz - 16kHz)
Nominal Impedance: 8 ohms
Crossover Type: 2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct)
Low Frequency Driver: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Dimensions
Dimensions (H x W x D): 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in), 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight: 3.0 kg (6.7 lbs)
Shipping Weight: 7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
Frequency Range (-10 dB): 60 Hz to 20 kHz
Frequency Response (+/-3 dB): 85Hz - 17 kHz
Power Rating: 200 W Continuous Program (2 hrs) , 100 W (400W peak), Continuous Pink Noise (2 hrs) , 75 W (300W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage: 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL: 110 dB ave. Continuous Pink Noise (116 dB peak)
Sensitivity: 90 dB, 1W/1m (ave. 100 Hz - 10 kHz)
Coverage Angle: 100° x 100°
Directivity Factor (Q): 6.04 (averaged 1kHz - 16kHz)
Directivity Index (DI): 7.6dB (averaged 1kHz - 16kHz)
Nominal Impedance: 8 ohms
Crossover Type: 2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct)
Low Frequency Driver: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Dimensions
Dimensions (H x W x D): 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in), 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight: 3.0 kg (6.7 lbs)
Shipping Weight: 7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
