Login Area

Sphera 360 "Base Version" - Easydive

Underwater Housing > Camcorders Sub Housing Rigid
₦ 14,706,215.00
VAT Included
Adcom - Easydive
New
Available in 10 days
With Sphera 360 Easydive launches into the world of 360 VR.

The only case in the world guaranteed up to 150 meters deep.
This extraordinary case dedicated to the Insta360Pro 2, allows you to create 360-degree underwater images with very high quality.

Of course, all the technology that Easydive has patented over the years was used in its creation.

Sphera 360 "Basic":
This version includes the Sphera 360 case, including an additional internal battery (extra autonomy about 1 hour and 30 minutes), battery charger, 2 dome protection caps for mounting.

With this version, it will be possible to easily apply a telescopic pole and control the start of the recording or take a 360 photo using the on / off button.
In the water the case is almost neutral so you can easily hold it underwater to create incredible images.

The case is made of 2 blocks of aluminum, with double sealing o-rings for maximum guarantee, and allow use up to a depth of 150m.

To have the maximum yield for all the cameras, 6 plexiglass microdomes have been applied that derive from the technology for the DSLR and Mirrorless cases.

The closing system takes place via 4 stainless steel hinges.

Externally there are also 1 mechanical ignition button with double o-rings and 1 small plexiglass window that allows you to view the internal display of the Insta360Pro 2.

On the upper part of the case there are 12 threaded holes M6, 2 zincs that serve to protect the case from corrosion and galvanic currents, in addition there are also 2 M14x1 plugs, these are predisposed to be able to install various optional ex: vacuum system, video output on the surface, hydrophone etc.

In the lower part of the case there are 10 M6 threaded holes, in addition there are 2 M14x1 caps, for the Silver and Gold version there is a fischer panel connector in one of these predispositions that allows the connection via antenna cable to the Leo3smart case which will allow the management of the Insta360Pro app, the visualization of the cameras and allows access t
Dimensions
° Height: 290 mm.
° Width: 165mm.
° Diameter: 160 mm.
° Weight of case complete with additional battery without Insta360Pro 2 dry: 2.3 Kg
° Weight complete with additional battery and InstaPro2 dry: 3.6 Kg
° Weight in water complete with additional battery and Insta360Pro 2: 100 gr
° Maximum Guaranteed Depth: 150 m

SPHERA 360: BASIC VERSION Includes:
- 1 anticorodal aluminum case with double o-rings, mechanical on / off button (which enables rec or photo).
- 1 additional LI.fe battery of 12.8V and 3.3 Ah, which guarantees an extra power supply of about 1 hour and 30 minutes in addition to the battery
standard of Insta360Pro 2, and equipped with battery charger.
- 1 antenna inside the case to amplify the wi-fi signal and allow control via smartphone.
- 2 sacrificial zincs to protect the case from salt and corrosion.
- 2 protective caps to safely rest the case
- 4 stainless steel lever latches
- 4 M14x1 stainless steel caps to allow the installation of various accessories (eg. Vacuum System etc …)
- several M6 threaded holes to allow the installation of different accessories, support brackets, stands, carrying handle, etc.
- 1 anticorodal aluminum case with double o-rings, mechanical on / off button (which enables rec or photo).
- 1 additional LI.fe battery of 12.8V and 3.3 Ah, which guarantees an extra power supply of about 1 hour and 30 minutes in addition to the battery
standard of Insta360Pro 2, and equipped with battery charger.
- 1 antenna inside the case to amplify the wi-fi signal and allow control via smartphone.
- 2 sacrificial zincs to protect the case from salt and corrosion.
- 2 protective caps to safely rest the case
- 4 stainless steel lever latches
- 4 M14x1 stainless steel caps to allow the installation of various accessories (eg. Vacuum System etc …)
- several M6 threaded holes to allow the installation of different accessories, support brackets, stands, carrying handle, etc.

Accessories for SPHERA 360 "BASE VERSION"

Others customers also ordered
Best selling