Teradek RT-FIZ Kit (CTRL.3,MDR.X….)

MDR.X 3-Channel Lens Control Receiver with Bluetooth
General
Compatibility: Teradek RT FIZ Controllers
Display
Panel Type: OLED
USB I/O: 1 x Mini-USB Integrated Male Input
Power
Power Source: Battery (Not Included)
DC Input Power: 7 to 17 VDC
Environmental
Operating Temperature: -4 to 122°F / -20 to 50°C
Storage Temperature: -40 to 185°F / -40 to 85°C
Physical
Mounting:
- Side: 1 x Through Hole
- Multiple x 1/4"-20 Threaded Hole
Material of Construction: Sluminum Slloy
Dimensions: 3.7 x 2.3 x 0.7" / 9.4 x 5.8 x 1.8 cm
Weight: 4.8 oz / 136 g

CTRL.3 Three-Axis Wireless Lens Controller (Imperial)
System
Number of Channels: 3
Maximum Range:
- Outdoor: 5000' / 1524 m
- Indoor: 500' / 152.4 m
Wireless Frequency: 2.4 GHz
Receiver / Motor
Bluetooth: No
Included Drive Gear: No
Operating Temperature: -4 to 122°F / -20 to 50°C
Storage Temperature: -40 to 185°F / -40 to 85°C
Transmitter / Controller
Transmission Delay: 2 ms
Transmitter I/O:
- 1 x LEMO 5-Pin
- 1 x USB-A
Battery Type: LP-E6
Material of Construction: Aluminum
Dimensions: 5.1 x 3.3 x 6.2" / 12.95 x 8.38 x 15.75 cm
Weight: 1.66 lb / 754 g

RT MOTR.S Lens Motor
General
Gear Pitch: 0.8 MOD
Maximum Torque:
- 0.95 nm (Peak)
- 0.3 nm (continuous)
Maximum Speed: 297 teeth per second
Connectors: 2 x 0B 4-Pin
Power
Power Source: Plug-In Power
DC Input Power: 7 to 32 VDC
Operating Current:
- 1 A (Standby)
- 2 A (Maximum)
Environmental
Operating Temperature: 32 to 82°F / 0 to 50°C
Physical
Mounting:
- 1 x 15mm Rod Clamp
- 1 x 19mm Rod Clamp
Color: Black
Material of Construction: Aluminum
Dimensions: 4.2 x 2.2 x 1.2" / 106 x 56 x 31 mm
Weight: 6.5 oz / 184 g

Bit 718 2-Pin LEMO to LEMO Alexa Cable (18")
Connector 1: 2-pin LEMO
Connector 2: 2-pin LEMO
Length: 18" / 46 cm

2-Pin LEMO to P-Tap Cable (18")
Length: 18" (46 cm)
Connector 1: 2-pin LEMO, male
Connector 2: P-Tap, male

ARRI Run/Stop Cable for MDR.X Receiver (24")
Physical
Connector 1: 6-Pin Push-Pull
Connector 2: 3-Pin Fischer
Compatible Camera: ARRI ALEXA/AMIRA Camera
Length: 24" / 60 cm

RED Run/Stop Cable for MDR.X Receiver (16")
Physical
Connector 1: 6-Pin Push-Pull
Compatible Camera: RED Camera
Length: 16" / 40 cm

LANC Run/Stop Cable for MDR.X Receiver (16")
Physical
Connector 1: 6-Pin Push-Pull
Compatible Camera: LANC-Equipped Camera
Length: 16" / 40 cm

5-Pin to Micro-USB 2.0 Type-B Monitor Cable for SmallHD Overlays (16")
Connector 1: 5-Pin Circular Locking Connector
Connector 2: Micro-USB 2.0 Type-B
Length: 16" / 40 cm
Weight: 0.5 oz / 14.2 g

RT 5-Pin to USB Type-A Interface Cable for SmallHD 1300 & 1700 Series Monitors
Physical
Connector 1 : 5-Pin
Connector 2 : USB Type-A

RT SmallHD Monitor Interface Cable (24")
Transmitter / Controller
Connectors:
- Monitor End: 5-Pin (Straight)
- Teradek RT End: 5-Pin (Right-Angle)
Length: 24" / 0.6 m

RT Wired-Mode Controller Cable (6.6')
Cable Length: 6.6' (200 cm)

4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (8")
Transmitter / Controller
Compatibility: RT MOTR.X Brushless Lens Motor
Length: 7.8" / 20 cm
Connector: 4-Pin Straight Angle

4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (16")
Transmitter / Controller
Compatibility: RT MOTR.X Brushless Lens Motor
Length: 15.7" / 40 cm
Connector: 4-Pin Straight Angle

4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (24")
Transmitter / Controller
Compatibility: RT MOTR.X Brushless Lens Motor
Length: 23.6" / 60 cm
Connector: 4-Pin Straight Angle

White Disc for CTRL.1/CTRL.3 Controller
Transmitter / Controller
Compatibility: CTRL.1 and CTRL.3
Dimensions: 3.2 x 0.87 x 3.2" / 81 x 22 x 81 mm
Weight: 0.6 oz / 18 g