Login Area
Register Forgot Password?
Categories

Dji SDR Transmission 2EAN  6937224145887

SDR Transmission 2 - Dji
DjiDjiNEW
EAN:6937224145887
₦ 603,414.43
VAT Included
Available in 15 days
DJI Transmitter with USB-C/HDMI/SDI connections, 1080p/60fps, 4K/60fps DCI, a maximum encoding bitrate of 50 Mbps, and a transmission range of up to 4 km - CP.TR.00000055.04

One-to-Many Transmission
A single transmitter can connect to up to 8 receivers, each supporting output control. It supports the simultaneous operation of up to 5 transmitters and 40 receivers.

Auto Channel 2.0
When Auto Channel mode is active, transceivers automatically detect each other and intelligently assign frequency bands, eliminating the need for manual planning.

Next-Gen SDR
Supports DCI 4K/60fps and 10-bit HDR (compatible with standard H.265 displays) with a maximum encoding bitrate of 50 Mbps, enabling ultra-high-definition monitoring.

Integrated Transmitter/Receiver
Features an integrated design that allows for quick switching of device roles based on the environment.
There is no need to pre-configure the transmitter-to-receiver ratio, significantly improving equipment utilization.
The main unit weighs only about 136 grams, making it easy to mount on various cameras and cinema rigs.
It also features 1 HDMI port and 2 USB-C ports.

Professional Monitoring
Quickly switch between camera views by tapping the screen or using the Ronin app.
Supports SDI, HDMI, or DP interfaces to transmit ultra-high-definition, low-latency video streams to professional monitoring devices. Ronin Ecosystem
When paired with DJI RS series stabilizers, a mobile phone can wirelessly control the gimbal and remotely start or stop recording; it connects to the DJI Ronin 2 and Master Wheel, or to Osmo Action or Pocket devices.



Number of Receivers
Broadcast mode: Unlimited receivers per transmitter.
Control mode: Supports up to 2 simultaneous control devices. Devices connected via Broadcast mode are unaffected.

Max Transmission Distance
SDR: 3 km (FCC) [Data obtained in Control mode, with Broadcast mode disabled.]

Latency
SDR: 35 ms
Camera and screen latency not included. Data obtained with 1080p/60fps video recording and Broadcast mode disabled.

Operating Frequency
2.4 GHz/5.2 GHz/5.8 GHz/DFS
5.8 GHz and DFS frequency bands are prohibited in some countries/regions. Check local laws and regulations for more information. The 5.600–5.650 GHz frequency band is not used.

Max Bitrate
20 Mbps
The maximum encoding bitrate of 20 Mbps was measured in Control mode, with Broadcast mode disabled. Actual encoding and transmission bitrates may vary depending on the environment and transmission distance.

I/O and Monitoring
Video ports: USB-C/HDMI/SDI
Monitoring output: USB-C/HDMI/SDI
App monitoring: Supported

Video and Audio
Max video format: 1080p/60fps
HDR: Not supported
Color sampling: RGB888
Audio monitoring: 16-bit, 48 kHz
Audio format: Input: Embedded SDI, Embedded HDMI | Output: PCM

Power Supply
Power supply type: NP-F battery | USB-C (PD) | Power from stabilizer
*When used with the DJI RS 5, RS 4 Pro, RS 4, or RS 3 Pro, the transmitter can be mounted on the stabilizer and powered directly by it, eliminating the need for a separate battery.
USB-C power input 1: 9 V, 2 A (PD protocol)
USB-C power input 2: 6.8–17.2 V DC
NP-F battery voltage: 6.8–8.4 V

General
Dimensions: 86.5×64×32 mm (L×W×H, excluding antennas)
Weight: Approx. 145 g (including antennas)
1x DJI SDR Transmission 2 Transceiver
1x DJI SDR Transmission 2 Camera Adapter Plate
1x DJI SDR Transmission 2 NP-F Battery Adapter
1x Firmware Update Cable (USB-C to USB-C, 50 cm)

Accessories for SDR TRANSMISSION 2

Wireless Video systems - Wireless Video Accessories

Others customers also ordered

Best selling

These are the articles in your cart
CHECKOUT